Application of cutting S690QL1 EN 10025-6 high strength steel

Low carbon steel is a carbon steel with a carbon content of less than 0.25%. Low carbon steel S690QL1 EN 10025-6 high strength steel is also called soft steel or mild steel because of its low strength and low hardness. Low carbon steel includes most common carbon structural steel and a part of high-quality carbon structural steel, most of which are used for engineering structural parts without heat treatment, and some S690QL1 EN 10025-6 high strength steel are carburized and other heat treated for mechanical parts that require wear resistance.

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as S690QL1 EN 10025-6 high strength steel, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.

Strengthen system construction. The system itself has a certain binding force, which specifies the rights and obligations of employees. It is a passive management means for employees. Its purpose is to promote each employee to develop good professional habits, form good behavior norms, and promote the improvement of enterprise management level.

The heat treatment process can significantly improve the physical properties of steel, improve the compressive strength, ductility and service life of parts, and improve the hardness and wear resistance. Therefore, critical equipment parts and special tools must be quenched and tempered. The quenching and tempering treatment can also improve the production and processing performance of the S690QL1 EN 10025-6 high strength steel product workpiece, thereby improving the production efficiency and production processing quality.