What is the EN10025-4 steel S460ML price export to Morocco

The company specializes in the research and development, production and sales of EN10025-4 steel S460ML seamless pipes, longitudinally welded pipes, large-diameter welded pipes, API 5L welded pipes, spiral welded pipes, and large-diameter thick-walled straight seam steel pipes. The company has EN10025-4 steel S460ML five production lines in three major production workshops: large-diameter longitudinally welded pipe production workshop,EN10025-4 steel S460ML rolled steel pipe production workshop, and thermally expanded steel pipe production workshop, with an annual production capacity of more than 100,000 tons.

Q345R steel is common low alloy steel, which is commonly used for boiler and pressure vessel. The delivery status includes hot rolling or normalizing. Q345R steel yield strength is 265-345MPa, tensile strength is 510-640MPa, elongation is greater than 21%, and zero degree V-shaped impact energy is greater than 34J. Q345R steel standard is GB713. Q345R steel has good comprehensive mechanical and technological properties. The content of EN10025-4 steel S460ML phosphorus and sulfur of Q345R steel is slightly lower than that of low alloy high strength steel plate.

Compared with EN10025-4 steel S460ML, boiler steel plates should have the following properties: (1) High medium temperature strength: low and medium pressure boiler drums use steel with a lower yield point, high pressure boilers use steel with a high yield point. (2) Good plasticity, impact toughness, cold bending and welding performance. (3) The notch sensitivity is small, that is, the sensitivity to the stress concentration caused by the opening of the steel plate surface and the welding of the pipe head is small.

Composition characteristics of Q420 alloy steel plate: 1.Low carbon: Due to the high requirements for toughness, weldability and cold forming performance, its carbon content does not exceed 0.20%. 2. Add manganese-based alloy elements. 3. Add auxiliary elements such as niobium, titanium or vanadium, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of the Q420 alloy steel, EN10025-4 steel S460ML.

EN10025-4 steel S460ML, S355J0 steel density is 7.85g/cm³. S355J0 density represents the mass per unit volume of S355J0 steel, which indirectly affects the price of S355J0 steel. Therefore, the density of S355J0 is also an important consideration for material selection. S355J0 steel tensile strength (σb / MPa):3

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our EN10025-4 steel S460ML products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.

Our quality and service commitment: EN10025-4 steel S460ML product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.