S355ML material specification Price in France 2021

Carbon steel plates are produced with thickness up to 3mm-350mm. We can supply S355ML material specification, hot rolled plate, sheets, and angles. Carbon steel plates tolerance: Thickness, width and length tolerances for steel plates are in accordance with ASTM A6. Our carbon steel plate tolerances or better are available for temper leveled plates. Flatness capabilities are determined bythe processing line and the minimum yield strength of the material.

The basic phases of S355ML material specification, structural steel in the annealed state are ferrite and carbide. The alloy elements are dissolved in ferrite to form alloy ferrite, which depends on solid solution strengthening to increase strength and hardness, but at the same time reduce plasticity and toughness. The addition of alloying elements reduces the carbon content of the eutectoid point, which increases the proportion of pearlite in the structure and reduces the distance of the pearlite layer. This also increases the strength of the steel and reduces the plasticity.

The difference between S355ML material specification, hot rolled sheet and cold rolled sheet: hot rolled sheet has low hardness, easy processing and good ductility. The cold-rolled sheet has high hardness and relatively difficult processing, but it is not easy to deform and has high strength. The cold rolled sheet is mostly used in automobile manufacturing and electrical products. Therefore, the two have their own characteristics. According to these characteristics, it is more appropriate to choose the right rolled plate to maximize its effect and benefit.