Production processes of S690QL1 specification

Primary processing, steel plate cutting processing cutting method, it is a flame cutting, because it to the accuracy requirement of the cutting size is not very high, the thickness of the S690QL1 specification plates in a certain range can be a good cutting quality and cutting effect, and the cut surface can be very smooth, however, it is important to note that in this work, is the need to pay attention to steel plate deformation at high temperature.

High quality steel sheet and plate product S690QL1 specification supply 10.5*1970*7950, 13*1300*4350, 11*1900*12500, 12.5*2870*7100, 11*1870*12500, 10.5*1970*8000, 13*1520*7950, 11*1910*9000, 12.5*2900*8250, 11*1870*13500, 10.5*2350*6200, 14*1440*6100, 11*3100*10000, 13*1510*4850, 11*1870*9300, 11*1570*12000, 14*1800*9750, 11.5*2640*7600, 13*2380*6000, 11*2400*10000.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

Carbon steel S690QL1 specification is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the S690QL1 specification content of sulfur and phosphorus, the better the quality of carbon steel.