High tensile strength EN 10025 S460M steel plate suppliers

EN10025-2 S355JR low alloy steel grade is equivalent to GB Q345B in Chinese standard. For the normal thickness, these two steel grades are both owned 345MPa yield strength. Plate S355JR+N indicates that the S355JR steel plate must be done Normalized heat treatment when rolling for improve the steel strength and weldability. Our mill would roll EN 10025 S460M steel plate, S355JR alloy steel plate under as rolled or control rolled when customers' have not requested any heat treatment in their P/O.

The weldability of EN 10025 S460M steel plate is good. It means that under certain process and construction conditions, EN 10025 S460M steel plate can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the EN 10025 S460M steel plate rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of EN 10025 S460M steel plate steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

BBN steel strictly control quality of our carbon steel plate, alloy steel plates and structural steel plates. For EN 10025 S460M steel plate ASTM A572 Grade 50 structural steel plate, Our Q/C Department will inspect dimension before shipment, making sure structural steel plate thickness tolerance and width, length tolerance are matchable to the EN 10025 S460M steel plate standard requirements. The company is a good ASTM A572 Grade 50 structural steel plate supplier in the globle market and the head is located in China. Welcome to send us inquiry and questions about structural steel plate.

Provide special product requirements to meet the personalized needs of customers. The EN 10025 S460M steel plate company arranges production and shipment strictly according to the contract, and guarantees to supply goods according to the time agreed in the contract. Provide professional consultation: we guarantee to answer any professional and EN 10025 S460M steel plate technical questions raised by users within 1 hour; provide detailed information.