en10025-4 S355ML properties

Non-secondary EN10025-4 S355ML product hot selling: 26*1500*9950, 23.5*2040*8100, 24*1500*6700, 23.5*1640*6550, 29*2140*7700, 30*1500*6000, 24*2000*9550, 26.5*2000*7000, 26*1600*6000, 32*1570*6000, 32.5*1560*6250, 25.5*1300*6000, 27*2550*6800, 27.5*2700*5500, 33*2340*6700, 34*1300*4000, 25.5*1740*8700, 29*2550*9000, 29*2870*12000, 26*1300*8100, 32.5*3050*6500.

We do sand blasting and shop primer for various en10025-4 S355ML steel plates such as carbon steel plates, high strength low alloy steel plates, shipbuilding steel plates, etc. before delivery, so as to protect the steel plates from going rust during transportation. Our sand blasting standard is SA2.5, and shop primer en10025-4 S355ML thickness is 20μm or so. Our shop primer has been certified by ABS, LR, BV etc. authorities.

en10025-4 S355ML, Q345 and Q345B are steel numbers. The differences are as follows:1. Q345 is general and does not indicate the quality level; Q345B is clear and the quality level is B.2. Q345 does not require to inspect the impact performance; Q345B requires that the impact performance at room temperature is qualified (impact at 20 ℃).3. Q345 does not indicate carbon content of steel; Q345B carbon content is 0.20%.Q345 refers to carbon structural steel with yield point (σ s) of 345MPa. The following letters indicate the quality level, including A, B, C, D and E.

The company produces and export steel plates and steel section products of various materials all year round. The width of the en10025-4 S355ML thin plate is 500 - 1500 mm; the width of the thick plate is 600 - 3000 mm. Steel plates are classified by steel type, including ordinary steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, etc .; according to use, there are shipbuilding plate, pressure vessel plate, wear resistant steel plate, bridge builidng steel, corten steel plate, and pipeline steel plate.