What are the precautions in the cutting of EN S275M steel

The weldability of EN S275M steel is good. It means that under certain process and construction conditions, EN S275M steel can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.

Service concept: first time to understand customer needs, first time to solve customer worriesVision: to be the leading steel materials supplier in the worldWorking principles: Keep promises; Spare no efforts; Be practical and innovative; Pursue excellenceTalent concept: build a team with a dream and complete a dream with a team!Family culture: we rely on the principles of equality, trust, appreciation and family love to form a harmonious and warm family!

Compared with ordinary steel, structural steel has the following differences. First, the strength of structural steel is high, and its bearing capacity is far greater than that of ordinary steel. Second, the structural steel has low impurity and carbon content, uniform material and good performance. Third, structural steel has light weight and is suitable for building various frames. Fourth, it is convenient to build structural steel, which is conducive to construction efficiency and reduces construction time. In some construction fields, structural steel must be used. Where can we find EN S275M steel, structural steel suppliers?

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as EN S275M steel, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.