OD rand(10.3,965.2 mm for EN10025-4 S460ML steel plates seamless pipe

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us EN10025-4 S460ML steel plates specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

EN10025-4 S460ML steel plates, Q460 material is a low-alloy high-strength steel. Q stands for the strength of steel. 460 means that plastic deformation occurs only when the strength of the steel reaches 460MPa. That is, when the external force is released, the steel can only maintain the shape of the force and cannot return to its original shape. This strength is greater than that of ordinary steel. Tensile strength is 550-720MPa, elongation: 17%, Q460 material is made by adding Cr, N, V, Ti and other alloying elements on the basis of 16Mn steel.

BBNsteel shipbuilding steel plate EN10025-4 S460ML steel plates for sale: 17*1640*9880, 17*2050*6000, 15.5*2800*8200, 16.5*2770*7200, 17*2790*5700, 19.5*2980*5300, 17.5*1550*8100, 16.5*1500*8750, 18*1500*7000, 17.5*3100*6350, 20*2880*5830, 17.5*2000*10000, 17*2970*6200, 18*1500*7230, 18*2450*5500, 17.5*2320*13000, 17.5*1750*10400, 18*2810*4200, 18*2520*5000, 20*3000*7500, 18.5*2600*10800.

During the steel plate cutting, the special-shaped steel plate cutting process is often carried out. In this operation process, some cutting curves will be generated. Therefore, there should be relatively high precision standards during the processing of EN10025-4 S460ML steel plates. The operators need to have rich experience, and they also need to be proficient in the operation methods and working skills of the equipment, so as to ensure that the steel plate can meet the shape requirements after processing.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

Since its inception, the company has always adhered to the development policy of "survival with quality, development with products, cooperation with credibility, and service with customers". I would like to express my heartfelt thanks to the old and new friends and customers who have always given care, support and help to the company! And sincerely hope to establish a long-term cooperative relationship with them, mutual benefit and common development.