Mild steel S420ML steel h beam chequered plate

A514 gr.H quenched and tempered alloy steel sheet chemical composition (melting analysis)%C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.95-1.30, P max.: 0.035, S max.: 0.035, Cr: 0.40-0.65, Ni: 0.30-0.70, Mo: 0.20-0.30, V: 0.03-0.08, B: 0.001-0.005The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18

We have 4 typical production lines S420ML steel h beam, which can produce hot rolled Seamless, LSAW, ERW and SSAW pipes. The Seamless pipe production line range is OD 10.3mm-965.2mm, wall thickness 1.0mm-60mm, Annual capacity is 500 thousand tons. LSAW pipe production line range is OD 406mm-1524mm, wall thickness 6mm-50mm, Annual capacity is 150 thousand tons.

Customer concept: customer first. Guided by market changes and guided by customer needs, we design the optimal product solutions and provide the best after-sales service. Partners: to reach a balance of interests with all stakeholders, to build a harmonious coexistence and win-win cooperation.

Phosphorus is a very harmful element in S420ML steel h beam steel. With the increase of phosphorus content, the strength, flexion ratio and hardness of S420ML steel h beam steel increased, but the plasticity and toughness decreased significantly. In particular, the lower the temperature, the greater the impact on plasticity and toughness, increase the cold brittleness of steel.