How to protect the S275M plates from cracking

Our company's S275M plates power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the S275M plates utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

Grade EH36 marine steel: E is the quality grade E, H is the high-strength building material, 36 is the maximum compression, and Z is the Z-direction stretching. Grade EH36 structural steel for high-strength hull refers to the steel used for manufacturing the hull structure produced according to the requirements of the classification society. Our company mainly supply Grade EH36 hot rolled plate, S275M plates, Grade EH36 angle steel bars and steel sections.

Grades S275M plates, Q345 (16Mn) and Q390 steel have good comprehensive mechanical properties, good welding performance, cold and hot workability and corrosion resistance. C, D, E grade steel has good low temperature toughness. Mainly used for ships, boilers, pressure vessels, petroleum storage tanks, bridges, power station equipment, lifting and transportation machinery and other higher-load welding structural parts.

Composition characteristics of low alloy structural steel, S275M plates: (1) Low carbon: the carbon content of low alloy structural steel is less than 0.20% due to the high requirements of toughness, weldability and cold formability. (2) The alloy elements such as manganese are added. (3) The addition of Nb, Ti or V and other auxiliary elements: a small amount of Nb, Ti or V forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of low alloy structural steel. In addition, adding a small amount of copper (≤ 0.4%) and phosphorus (about 0.1%) can improve the corrosion resistance. The addition of a small amount of rare earth elements can remove sulfur and gas, purify the steel, and improve the toughness and process performance of low alloy structural steel.

The chemical composition of 20CrMo steel pipe is 0.17-0.24, Si: 0.17-0.37, Mn: 0.40-0.70, Cr: 0.80-1.10, Mo: 0.15-0.25. Mechanical properties of 20CrMo steel pipe: tensile strength 410 Mpa; yield strength: 265mpa; elongation after fracture: 24; reduction of area: 60; impact absorption energy: 110J. 20CrMo steel pipe belongs to alloy structure steel pipe, which has high thermal strength, good high-temperature strength, good machinability, medium cold bending plasticity, high hardenability and good welding performance at 500-520℃. S275M plates, 20CrMo steel pipe is generally used in quenching and tempering state.

There is a silo technology R&D center in our company with many experts. Our technical backbones go abroad to study advanced technologies regularly to make our technology and products leading in the world. We provide our customers with S275M plates high-quality steel plates, the excellent quality from specialty. With good reputation, high-quality products, strong strength, and low prices, we welcome the clients from the world to come to visit our factory.

We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide S275M plates reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.