How to distinguish the quality of en10025 S460ML

Vanadium mainly exists in the form of carbide in en10025 S460ML and so on steel. Its main function is to refine the structure and grain size of steel and reduce the strength and toughness of steel. When the solid solution is dissolved at high temperature, the hardenability is increased; conversely, if it is in the form of carbide, the hardenability is reduced. Vanadium increases the tempering stability of quenched steel and produces secondary hardening effect. The vanadium content in steel, except high speed tool steel, is generally less than 0.5%.

As steel transportation belongs to the transportation of major parts, so in the process of transportation, modern logistics technology, such as centralized transportation, information technology, is a bit out of place. Based on the current situation of China's en10025 S460ML steel transportation industry, highway transportation is a way of transportation that many enterprises often choose. Naturally, its business volume also accounts for more than 50% of the whole en10025 S460ML steel transportation industry.

The difference between cold rolled steel sheet and hot rolled steel plate. The carbon content of en10025 S460ML, hot rolled steel plate is slightly higher than that of cold rolled steel sheet. In the case of little difference in composition, the density of cold rolled steel sheet and hot rolled steel plate is the same. Hot rolled steel plate has characteristics of low hardness, easy processing and good ductility. Cold rolled steel sheet has high hardness, and it is relatively difficult for processing. But it is not easy to deform and has high strength. Hot rolled steel plate can be made into alloy steel plate by adding other elements, and its properties are also excellent compared with other high-quality steel plates.

The steel plate for water conservancy and power generation is used for ring seat, motor support structure, ship lock gate and discharge chute volute of large water conservancy generating units; the representative steel grades are S500Q, S550Q, SA516, etc., which require flaw detection and have Z-direction performance requirements; the main specifications are thickness of 120mm, 180mm, 200mm, 215mm, 270mm, and the maximum width is 4400mm. The representative steel grades of wind power steel plates include Q345E, Q690E, en10025 S460ML, etc.; the main specifications are thickness of 80mm, 100mm, 110mm, 120mm, 140mm, 160mm, 180mm, 200mm, 240mm, 260mm, 280mm, 300mm, and the width is more than 2500mm.