Hot rolled S355ML material specification mechanical properties

S355ML material specification surface cracks refer to the linear cracks on the surface of S355ML material specification, which should generally be the same as the forging or rolling direction. Formation reason: it is mainly due to the hairline, hot crack and cold crack caused by surface over burning, decarburization, looseness, deformation and excessive internal stress during processing (forging, rolling, heat treatment, quenching and tempering), as well as the high content of sulfur and phosphorus impurities on the surface. Inspection method: S355ML material specification surface cracks can be detected by naked eye observation, acid pickling, magnetic particle inspection, coloring inspection and metallographic method.

Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.

Medium plate S355ML material specification products size: 5.5*2250*11550, 5*2200*10100, 5*1500*4500, 6*1750*13000, 5*2700*12050, 5*2700*12050, 6*1800*5500, 6*1550*6000, 9*2000*6000, 5.5*2600*10100, 5*2500*11000, 7*1800*10450, 6*3080*6000, 9*2000*9000, 5.5*2600*11850, 6*3320*5000, 9*1760*7800, 6*3370*4100, 9*2400*9800, 7*1970*7050, 6*3240*5400, 9*1800*10000, 6*3380*4800, 7*2120*6400 and 9*2400*8500.

The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as S355ML material specification, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.