Grade steel plates S355ML ASME equivalent steel

At the same time of doing well in steel plates S355ML production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the steel plates S355ML technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

SA299GrB steel plates with a thickness of less than or equal to 50mm are usually delivered in the rolled state, and can also be delivered in the state of normalizing, stress relief, or normalizing plus stress relief. Steel plates with a thickness greater than 50mm should be normalized heat treatment. It can also add flaw detection standard requirements, flaw detection level requirements, alloy element composition control requirements, etc. according to needs.

Special boiler steel is derived from carbon structural steel, steel plates S355ML. The expression of boiler steel grade is similar to that of high-quality carbon structural steel, and the carbon content is usually 0.20%. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same brand, but the mechanical properties are strictly required, especially the impact toughness, and the aging sensitivity is required to be small. After deoxidation and removal of non-metallic inclusions, boiler steel has a uniform structure, the grain size is controlled at 3-7 grade, and the defects such as interlayer, shrinkage, porosity and porosity are relatively less.

Due to the existence of this dense oxide film, the infiltration of oxygen and water into the steel matrix in the atmosphere is prevented, the development of corrosion into steel material is slowed down, and the atmospheric corrosion resistance of steel material is greatly improved. steel plates S355ML, Weathering steel is a kind of steel system which can be used thinly, exposed or simply painted, and make products resistant to corrosion, prolong life, save labor and reduce consumption, upgrade and replace.

"Adopt standard specification: ASTM, JIS, EN, DINCategory: Structural Steel, carbon steel plate, steel plates S355ML, hot rolled plateCarbon steel plate specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mmThird Party Inspection: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department."

Our company has strict quality control standards. If you want to visit our factory, you are welcome at any time! We produce a lot of steel products every month to export steel plates S355ML to all over the world. Because our customers are from all countries, they will order a large number of steel products from our company every month.

We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.