Grade S355M material application

Steel plate is divided into rolling, hot rolling and cold rolling. The width of the thin plate is 500 ~ 1500 mm; the width of the thick plate is 600 ~ 3000 mm. Thin plates are classified according to steel types, including ordinary steel, steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, S355M material, bearing steel, etc .; according to use, there are ship plates, pressure vessel plates, atmospheric corrosion-resistant steel plates, bulletproof steel plate.

20Mn2 steel has medium strength, and the properties of 20Mn2 steel and 20Cr steel are similar. The impact toughness and weldability of 20Mn2 steel at low temperature are better than those of 20Cr steel. The plasticity and machinability of 20Mn2 steel are high during cold deformation. The hardenability of 20Mn2 steel is higher than that of corresponding carbon steel, S355M material. Chemical composition of 20Mn2 steel: C: 0.17-0.24, Si: 0.17-0.37, Mn: 1.40-1.80. Mechanical properties of 20Mn2 steel: tensile strength ≥ 785 MPa, yield strength ≥ 590 MPa, elongation after fracture ≥ 10%, section expansion rate ≥ 40%, impact absorbed energy ≥ 47J.

"Efficiency is benefit, time is money", the company is equipped with a high standard logistics team. After the products pass the factory inspection, they will coordinate the shipment as soon as possible according to customer requirements and schedules to hand over the booked steel materials to customers at the first time, to ensure no delay of customer's project progress, to strive for more project preparation time for customers.

Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.

3500 tons SA387GR5CL1 steel plate to make pressure vessel equipment in Pakistan. The main business of our this client from Pakistan is manufacturing Columns&Towers, Heat Exchanger,Waste Heat Recovery Boiler, Pressure Vessel&Reactors,Tanks, Metering Skid. And we supply S355M material the Mill Certificate, Shipping picture, the marking of steel plate and we help client to do SGS inspection.

The gas cylinder steel is one of our featured products. The pickled LPG steel is available. We supply gas cylinder steel coil, gas cylinder steel sheet and gas cylinder S355M material steel plates. Welcome to consult any question about gas cylinder steel or LPG steel, such as JIS G3116 SG295 coil price, SG255 material properties, SG325 plate dimensions, HP265 equivalent, P245NB steel properties, etc. We are always here to serve you.