EN S460ML equivalent overheat sensitivity

Flame cutting uses the high temperature generated during the combustion of iron oxide to cut carbon steel EN S460ML equivalent. The design of the flame cutting torch provides sufficient oxygen for burning iron oxide to ensure a good cutting effect. The CNC flame cutting machine is a mechanical equipment mainly suitable for the cutting of medium and thick plates. Compared with other similar thermal cutting methods, the CNC flame cutting machine has the characteristics of high cutting quality, good cutting surface perpendicularity, and large cutting thickness.

"Adopt standard specification: ASTM, JIS, EN, DINCategory: Structural Steel, carbon steel plate, EN S460ML equivalent, hot rolled plate Carbon steel plate specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mmThird Party Inspection: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department.

A514 gr.E quenched and tempered alloy steel chemical composition (melting analysis)%C: 0.12-0.20, Si: 0.20-0.40, Mn: 0.40-0.70, P max.: 0.035, S max.: 0.035, Cr: 1.40-2.00, Mo: 0.40-0.60, Ti: 0.01-0.10, Cu: 0.15-0.50, B: 0.001-0.005The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18

For the EN S460ML equivalent construction industry, the largest consumer sector of the steel industry and the least affected industry in the EU this year, it is estimated that EN S460ML equivalent steel consumption will account for 35% of the EU steel consumption market this year. Uestf forecasts that the output of the construction industry will decline by 5.3% in 2020 and rise by 4% in 2021.