EN S420ML steel common size

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

SA299GrB steel plates with a thickness of less than or equal to 50mm are usually delivered in the rolled state, and can also be delivered in the state of normalizing, stress relief, or normalizing plus stress relief. Steel plates with a thickness greater than 50mm should be normalized heat treatment. It can also add flaw detection standard requirements, flaw detection level requirements, alloy element composition control requirements, etc. according to needs.

The chemical composition of Q345D seamless steel pipe is as follows: C ≤ 0.18, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.030, S≤ 0.025, Nb ≤ 0.07, V ≤ 0.15, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.50, Cu ≤ 0.30, N ≤ 0.012, Mo ≤ 0.10, Al ≥ 0.015. EN S420ML steel, Q345D seamless steel pipe has good comprehensive mechanical properties, low temperature impact toughness, corrosion resistance, cold stamping, machinability and weldability. Q345D seamless steel pipe is widely used in welding structures, such as bridges, vehicles, ships, pipelines, boilers, large vessels, etc..

Flame cutting uses the high temperature generated during the combustion of iron oxide to cut carbon steel EN S420ML steel. The design of the flame cutting torch provides sufficient oxygen for burning iron oxide to ensure a good cutting effect. The CNC flame cutting machine is a mechanical equipment mainly suitable for the cutting of medium and thick plates. Compared with other similar thermal cutting methods, the CNC flame cutting machine has the characteristics of high cutting quality, good cutting surface perpendicularity, and large cutting thickness.

We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.

Company tenet: first class quality and service to create corporate brand.Business philosophy: people-oriented, innovation, continuous improvement, the pursuit of excellence. Quality policy: carry forward the quality spirit, build a perfect quality management system, and put the quality strategy into every detail of the company's daily work.Environmental policy: waste reduction and pollution prevention, continuous improvement, and environmental protection.