Cutting method of S420ML steel plate

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

S355J2 is a low-alloy high-strength steel, which can be treated to meet the requirements of Z-15, Z-25, Z-35 and level I, level II and level III flaw detection.The extension grades of S355J2 are S355J2, S355J2-Z35 and S355J2 + N-Z35, S420ML steel plate. On the basis of S355J2, S355J2-Z35 increases the requirement of S355J2 steel plate thickness direction performance, namely Z-direction performance. S355J2 + N-Z35 is a heat treatment process which increases Z-direction properties and normalizing rolling (or normalizing).

S420ML steel plate annealing is to heat the steel to 30 ~ 50℃ above the critical temperature, keep it in the heat treatment furnace for a period of time, and then cool it down to room temperature with the furnace. The purpose of S420ML steel plate annealing is to refine the grain of steel, eliminate internal stress and reduce hardness, improve cutting performance, increase toughness and plasticity, and facilitate welding and rolling processes. S420ML steel plate annealing can be complete annealing, incomplete annealing, stress relief annealing, isothermal annealing and spheroidizing annealing.

"A283C is same as A283 Gr C, A283 grade C. A283C plate technical parameters: A283C plate chemical composition - max. 0.24% carbon, max. 0.40% silicon, max. 0.90% manganese, max. 0.035% phosphorus, max. 0.040% sulphuric, and min. 0.20% Cu. A283C plate mechanical properties: min. yield strength is 205 MPa, tensile strength is 380-515MPa, min. elongation is 22% in 8"" and 25% in 2"". Tolerance of A283C plate is subject to ASTM A6. The density of S420ML steel plate, A283C plate is 7.85g/cm3."

The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.

our company is a professional ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel exporter and a steel Stockist in china. We keep more than S420ML steel plate 1000 tons ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel in stock every month.