as rolled plate S355ML plate stock size

S355ML plate and so on steel structure engineering steel has good plasticity, which can make the structure have obvious deformation before being destroyed, so as to avoid brittle failure of structure. The good plasticity of steel can adjust the local peak stress to redistribute the stress, and improve the ductility of components, so as to improve the seismic capacity of the structure. The impact toughness of S355ML plate and so on steel structure engineering steel is good, which can improve the ability of resisting dynamic load and avoid the occurrence of cracks and brittle fracture.

S355ML plate products 2020 online supply: 6*1950*10000, 6*2000*10000, 6*2200*10000, 6*2800*12000, 7*2200*8000, 7*2920*8200, 7*2920*8780, 2200*11200, 8*2200*5730, 8*2210*11000, 8*2400*12000, 9*2300*6870, 12.5*2900*11000, 12.9*2987*10384, 13.6*2940*11455, 14*1950*10900, 14*1950*10950, 14*1950*11000, 14*1950*8000, 14*2000*13500, 22*3400*13000, 23.1*2590*7790, 25*1600*9300.

Chemical composition of Q390C steel plate: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.7, P ≤ 0.030, S ≤ 0.030, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.50, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.10, Al ≤ 0.015. The mechanical properties of Q390C steel plate are: yield strength ≥ 390 MPa, tensile strength 470-620 MPa, elongation after fracture ≥ 18%, impact energy 34J. S355ML plate, Q390C steel plate is used for bridges, vehicles, ships, workshops and other large structural parts, high and medium pressure Petrochemical vessels, boiler tubes, pipes, superheaters, pressure vessels, heavy machinery, etc. application.

Advantages of hot rolling: hot rolling can destroy the casting structure of ingot, refine the grain of steel and eliminate the defects of microstructure, so that the steel structure is dense and the mechanical properties are improved. This improvement is mainly reflected in the rolling direction, so that the S355ML plate steel is no longer isotropic to some extent; the bubbles, cracks and looseness formed during pouring can also be welded under the action of high temperature and pressure.