1-1/4 inch EN S460M steel plate stock

Analyze the advantages and disadvantages of the products against the competitive products. Understand the industry situation and future trend. Understand the EN S460M steel plate product brand positioning appeal point, focus on the crowd and development direction. Understand the layout of each market area, and form a big strategic layout view. Understand the basic operation and assessment standards of work responsibilities. Understand the situation of the cooperative customers.

RAEX400 steel is a hardened wear-resistant steel material with an average grade of 400HBW and a Brinell hardness. The microstructure of this wear-resistant steel is a martensite structure, which can ensure the high hardness and tensile hardness of the steel plate. The hardness of RAEX400 is 2.5 times that of S355 structural steel, EN S460M steel plate. Despite its high hardness and high strength, RAEX400 steel can be formed by free bending or hemming, and has good weldability.

16Mo3 alloy are featured by the good heat resistance and corrosion resistance. 16Mo3 steel plate chemical composition(%):C: 0.12 ~ 0.2 Si: ≤0.35 Mn: 0.4 ~ 0.9 P: ≤0.025 S: ≤0.01 Cu: ≤0.3 Ni: ≤0.3 Cr: ≤0.3 Mo: 0.25 ~ 0.35 Al: ≥0.02 N: ≤0.012. 16Mo3 alloy steel mechanical properties:Yield strength (MPa) 372MPa, Tensile strength (MPa) 350MPa, Elongation (%) ≥22. Impact temperature (℃) 20, Impact energy value (J) 335J / cm². EN S460M steel plate, 16Mo3 steel plate is widely used in petroleum, chemical, power station, boiler and other industries.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the EN S460M steel plate rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of EN S460M steel plate steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel EN S460M steel plate plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.

The company always adheres to the concept of green production, follows the development path of innovation, transformation and improvement, and has carried out in-depth cooperation with Zhengzhou University and other scientific research institutes, planning from a high starting point, strict standard design, and successfully implementing engineering projects With nearly 20 research and development projects, the company's production technology and equipment are at the forefront of the industry, and indicators such as environmental protection, energy consumption, cost, and resource utilization have reached the advanced level in the industry.