What is the suppliers of S355 ml tensile strength

The difference between suppliers of S355 ml, 10# seamless steel pipe and 20# seamless steel pipeChemical composition Chemical composition of 10# seamless steel pipe: C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. Chemical composition of 20# seamless steel pipe: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25 Mechanical properties 10# seamless steel pipe: tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%. 20# seamless steel pipe: tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%.

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as suppliers of S355 ml, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.

According to the data released by the Japan iron and Steel Union (JISF), the export volume of Japanese steel in the second quarter of 2020 suppliers of S355 ml is about 4.959 million tons, a year-on-year decrease of 14.2%; the export volume in the first half of 2020 is about 11.07 million tons, with a year-on-year growth of 1.8%. It has been revealed that the year-on-year increase in export volume does not mean that Japan's export suppliers of S355 ml situation of Pugang is better in the first half of the year, but only because the base number of the same period last year is too low.