What grade is equal to the S460M specification

Based on the main business of iron and steel, we are committed to producing high-quality, green and efficient steel products. The main steel products are medium and S460M specification heavy plate, hot rolled coil, section steel, steel tube, etc., which are widely used in automobile, oil, railway, bridge, construction, electricity, transportation, machinery, shipbuilding and other important fields. Our steel products are exported S460M specification to Indonesia, Bangladesh, Myanmar, Iran, Brazil, Mexico, UAE, Iraq, etc Egypt, Mozambique, Ukraine and other dozens of countries and regions.

S460M specification, 40Cr material is a common machinery manufacturing steel under GB/T 3077-2015 standard. After tempering, it has good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28-60mm during water quenching and Ф15-40mm during oil quenching. The cutting performance is better, when the hardness is HB174 -229, the relative cutting workability is 60%.

The clad steel plate is based on carbon structural steel, which is sprayed with stainless acid resistant and heat-resistant steel on the surface. The clad steel plate is widely used to make acid and alkali resistant container. Advantages of clad steel plate: The appearance of the clad steel plate is very smooth, the quality is very good, and it will not rust. Disadvantages of clad steel plate: the S460M specification, clad steel plate has better requirements for production technology and are more expensive.

The density of wear-resistant plate is higher than that of some materials, S460M specification, which makes its hardness larger. The density of steel for wear-resistant plate is 7.85kg/dm cubic. After quenching, martensite structure is obtained and tempered at 450-600℃, or 350-600℃ after tempering at 650℃. Or after tempering at 650℃ and heating at 350-650℃ for a long time, the wear-resistant plate will be embrittled. If the brittle wear-resistant plate is reheated to 650℃ and then cooled quickly, the toughness can be restored, so it is also called reversible temper brittleness. High temperature temper brittleness is the increase of the transition temperature from toughness to brittleness.

S460M specification, No.45 seamless pipe belongs to high quality carbon structural steel. The carbon (C) content of No.45 seamless pipe is 0.42 ~ 0.50%, Si content is 0.17 ~ 0.37%, Mn content is 0.50 ~ 0.80%, Cr content is ≤ 0.25%, Ni content is ≤ 0.30%, Cu content is ≤ 0.25%. The tensile strength, yield strength, elongation, reduction of area and impact energy of No.45 seamless pipe are 600 MPa, 355 MPa, 16% and 40% respectively. No.45 seamless pipe is used to manufacture high strength moving parts.

SG255 gas cylinder S460M specification steel is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator. The company is a professional gas cylinder steel exporter and a steel stockist in china. We keep more than 1000 tons SG255 gas cylinder steel coils in S460M specification stock every month. If you want to get the steel price, please do not hesitate to contact us. Any need in SG255 Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling to us.

The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.