What are the potential applications of S500Q material

Q890E steel plate chemical composition: C≤0.20, Si≤0.80, Mn≤2.00, P≤0.020, S≤0.010, Cu≤0.50, Cr≤1.50, Ni≤2.00, Mo≤0.70, B≤0.0050, V≤0.12, Nb≤0.06, Ti≤0.05.Q890E steel plate yield strength: ≥890Mpa when thickness ≤50mm; yield strength: ≥830Mpa when 50mm ≤ thickness ≤100mm.Application scope of S500Q material, Q890E steel plate: Q890E steel plate is suitable for manufacturing hydraulic supports, heavy vehicles, construction machinery and other steel structures requiring good weldability.

High quality steel sheet and plate product S500Q material supply 10.5*1970*7950, 13*1300*4350, 11*1900*12500, 12.5*2870*7100, 11*1870*12500, 10.5*1970*8000, 13*1520*7950, 11*1910*9000, 12.5*2900*8250, 11*1870*13500, 10.5*2350*6200, 14*1440*6100, 11*3100*10000, 13*1510*4850, 11*1870*9300, 11*1570*12000, 14*1800*9750, 11.5*2640*7600, 13*2380*6000, 11*2400*10000.

The work concept attaches importance to talents, creates a high-income and high-standard employment mode and work mode, actively advocates all kinds of talents to inspire each other, respect each other, unite and act together, cultivates employees' corporate interests above all else, is tolerant and enterprising, learns correct ways of doing things, improves employees' Professional quality, encourages and urges employees to make continuous progress, Continuously realize self value and grow together with the enterprise.

The effect of nitrogen (N) on the properties of S500Q material and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in S500Q material and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.