Tianjin factory hot rolled iron EN S420ML equivalent

Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of EN S420ML equivalent, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.

At the same time of doing well in EN S420ML equivalent production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the EN S420ML equivalent technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

keyword} product plate production process:Raw materials (scrap steel, pig iron and molten iron) → electric furnace (100 tons electric arc furnace smelting) → converter → LF furnace molten steel refining treatment → VD or VOD furnace molten steel vacuum treatment → die casting (various key die casting lines) or continuous casting (large Slab caster) (50 tons of slab electroslag furnace for remelting a steel ingot) → heating (continuous furnace and soaking furnace) → steel plate rolling (4100 and 4200mm rolling mills) → steel plate heat treatment (normalizing and tempering) Quality) →Steel plate cutting inspection→Inspection

Alloying elements can strengthen the properties of structural steels. EN S420ML equivalent, Alloy structural steel has suitable hardenability. After proper metal heat treatment, the microstructure is uniform sorbite, bainite or very fine pearlite. Therefore, alloy structural steel has higher tensile strength and yield ratio (generally about 0.85), higher toughness and fatigue strength, and lower ductile brittle transition temperature. Alloy structural steel can be used to manufacture machine parts with larger section size.

We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide EN S420ML equivalent reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.