The S420ML material price cold bending performance from BBN

S420ML material price hot rolled products 2020 online stock: 16*2200*8000, 16*2000*10713, 20*2100*11600, 20*2150*10000, 25*1950*10150, 25*1950*9700, 30*2010*9500, 15*2500*10000, 50*2450*4800, 28*2170*13000, 60*2600*12150, 25*2400*8200, 40*2950*7100, 70*2270*7350, 70*2270*7600, 70*2500*12000, 75*2390*4320, 80*2200*10000, 88*3440*9200, 100*1770*6650.

10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. S420ML material price, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.

Over the years, the company has established a standard of S420ML material price steel products pre-sale, in sale and after-sale service, which meets customers' needs in all aspects and in the whole process, so that our products and services are deeply trusted by customers, and has established a long-term cooperation and mutual benefit relationship with customers. The company adheres to S420ML material price quality surpervision, comprehensively implements quality management, strictly controls the whole process of product from contract signing to after-sales service.

The basic phases of S420ML material price, structural steel in the annealed state are ferrite and carbide. The alloy elements are dissolved in ferrite to form alloy ferrite, which depends on solid solution strengthening to increase strength and hardness, but at the same time reduce plasticity and toughness. The addition of alloying elements reduces the carbon content of the eutectoid point, which increases the proportion of pearlite in the structure and reduces the distance of the pearlite layer. This also increases the strength of the steel and reduces the plasticity.