S460ML steel h beam steel weld pipe

BEBON has been engaged in the piping industry as a professional manufacturer and supplier of steel plates, ship plates, corten steel, pressure vessels, S460ML steel h beam steel pipelines, seamless pipe and ERW pipes since the inception. We provide integrated solutions to whole-package procurement covering miscellaneous ferrous and non-ferrous piping components. The products are widely used in oil & gas project, subsea or offshore platform piping, S460ML steel h beam chemical & pharmaceutical pipeline, power plant, sewage treatment, water supply piping, heat exchange application.

Material common grades: Q235B,Q345B, AB EH32, AB DH36, AB EH36, S460ML steel h beam, CCS-A, CCS-B,CCSA, CCSB, CCS,CCSD, CCSE. Carbon structural steel plates and sheets are mainly used in the manufacturing of mechanical parts with complex shapes and high requirements for mechanical properties, but it is difficult to shape them by forging and pressing in the process, such as the gearbox shell of the automobile, the coupler and coupling of the locomotive and vehicle.

The yield point of the steel structure determines the stress that the structure can withstand without permanent deformation. The minimum yield point of typical carbon structural steel is 235MPa. The minimum yield point of typical low-alloy high-strength steel is 345MPa. Therefore, according to the proportional relationship of its yield point, the use of low-alloy high-strength steel allows the stress to be 1.4 times higher than that of carbon structural steel. Compared with S460ML steel h beam, carbon structural steel, the use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight.

S355NC steel offers excellent bending, flanging, cold-bordering and folding S460ML steel h beam properties in both longitudinal and transverse direction. The bending radii specified below should be observed as minimum values.

20Mn2 steel has medium strength, and the properties of 20Mn2 steel and 20Cr steel are similar. The impact toughness and weldability of 20Mn2 steel at low temperature are better than those of 20Cr steel. The plasticity and machinability of 20Mn2 steel are high during cold deformation. The hardenability of 20Mn2 steel is higher than that of corresponding carbon steel, S460ML steel h beam. Chemical composition of 20Mn2 steel: C: 0.17-0.24, Si: 0.17-0.37, Mn: 1.40-1.80. Mechanical properties of 20Mn2 steel: tensile strength ≥ 785 MPa, yield strength ≥ 590 MPa, elongation after fracture ≥ 10%, section expansion rate ≥ 40%, impact absorbed energy ≥ 47J.

The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.