The use of low carbon steel is limited due to its low strength. The strength of the carbon steel can be greatly improved by properly increasing the manganese content in the EN S275ML steel plate carbo
As a common steel plate in the steel market, S275M plates, manganese steel plate has the following characteristics. First, good toughness, stretching and crimping can be done well. Second, the bearing
Composition of low alloy steel plate: Low carbon: due to the high requirements for toughness, weldability and cold formability of low alloy steel plate, the carbon content is not more than 0.20%; mang
The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should hav
MS carbon steel plate product EN S460M steel plate hot selling: 8*1500*6000, 12*3100*7400, 11*1870*9500, 10*1300*4000, 11*1870*13700, 12*1640*6800, 11*1870*10000, 7*2300*6000, 12*3100*8300, 11*1870*13
X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is abs
Plate 20 to 30mm thick S355ML material equivalent product: 20*1400*11400, 20*2100*7000, 20*2500*6200, 20*2933*7300, 20*3200*4400, 20.9*2851*7000, 21*2100*8810, 21.5*1630*13480, 22*3400*13000, 23.1*259
EN 10025-4 S460ML, St52-3 steel is a low alloy, high strength structural steel which can be readily welded to other weldable steel. St52-3 steel's mechanical properties is yield strength more than 355