HR S460ML steel tubing stock resources

S460ML steel tubing, Q390B steel plate generally adopts the process route of refined material entering the furnace-smelting (converter, electric furnace-microalloying treatment-argon blowing-LF refining-low superheat continuous casting (feeding rare earth wire)-controlled rolling and controlled cooling. During smelting, The scrap steel is added to the furnace along with the charge and smelted according to the conventional process. After tapping, the deoxidizer and alloy are added. After the molten steel is treated by argon blowing, it is cast immediately. Rare earth elements are added to the steel, the Q390B steel plate is purified, and the content of inclusions is greatly reduced.

The riser is an indispensable equipment in the development of offshore oil and gas resources, mainly for drilling, conducting liquid, conducting mud and transporting oil and gas. Because steel catenary risers face complex service conditions such as surges, seabed clay, and ice loads, they need to have high fatigue strength, large plastic deformation capacity, and excellent fracture toughness. At present, China's first self-developed and designed 6-inch steel catenary riser was successfully laid on August 18 this year in the first deep-water self-operated large gas field Lingshui 17-2 project.

S460ML steel tubing and so on steel structure engineering steel has good plasticity, which can make the structure have obvious deformation before being destroyed, so as to avoid brittle failure of structure. The good plasticity of steel can adjust the local peak stress to redistribute the stress, and improve the ductility of components, so as to improve the seismic capacity of the structure. The impact toughness of S460ML steel tubing and so on steel structure engineering steel is good, which can improve the ability of resisting dynamic load and avoid the occurrence of cracks and brittle fracture.

BBN STEEL supply S460ML steel tubing plate specifications range: thickness 8-650mm, width 1500-4020mm, length 4000mm-17000mm, single weight maximum 30.00 tons. Various special specification sheets can be rolled according to customer requirements. Types of steel products: carbon structural steel pipes, low-alloy high-strength steel sheet, steel angles for bridges, steel section for building structures, steel plates for shipbuilding and offshore platforms, steel for boilers and pressure vessels and alloy structures.