Hot rolled EN10025-4 S275M steel supplier main application

Generally, the production process of EN10025-4 S275M steel supplier seamless steel tube can be divided into cold rolling and hot rolling. The production process of cold-rolled seamless steel tube is generally more complicated than that of hot rolling. The tube blank must be first rolled by three rolls, and then be subject to sizing test and cutting after extrusion. Then enter the annealing process. In appearance, the cold-rolled seamless steel tube is shorter than the hot-rolled seamless steel tube, and the wall thickness of the cold-rolled seamless steel tube is generally smaller than that of the hot-rolled seamless steel tube, but the surface looks brighter than the thick wall seamless steel tube, the surface is not too rough, and the diameter is not too much burr.

45# steel is a common medium carbon quenched and tempered structural steel. The cold plasticity of 45# steel is general. Annealing and normalizing are slightly better than EN10025-4 S275M steel supplier quenching and tempering. 45# steel has higher strength and better machinability. After proper heat treatment, 45# steel can obtain certain toughness, plasticity and wear resistance. 45# steel is suitable for hydrogen welding and argon arc welding, not suitable for gas welding.

The strengthening mechanisms in metals mainly include solid solution strengthening, dislocation strengthening, fine grain strengthening, and second phase (precipitation and dispersion) strengthening. Alloying elements have the most significant strengthening effect on steel in the quenched and tempered state, because it makes full use of all four strengthening mechanisms. Martensite is formed during quenching, and carbides are precipitated during tempering, resulting in a strong second phase strengthening and greatly improving toughness. Therefore, obtaining martensite and tempering it is the most economical and effective comprehensive strengthening method for EN10025-4 S275M steel supplier.

In actual processing applications, the processing EN10025-4 S275M steel supplier thickness of flame cutting ranges from 6 to 200 mm, and the EN10025-4 S275M steel supplier cutting thickness can even reach 350 mm by replacing the air pipe and cutting torch nozzle. In order to better improve the cutting quality, the related process parameters will be slightly different when using flame cutting for materials of different thickness. The verticality of the cutting surface processed by the CNC flame cutting machine is generally high, and the slope can be controlled below 2-3°. The characteristic is that flame cutting performs better when cutting EN10025-4 S275M steel supplier with a certain thickness above 10mm.