Good quality S355ML material with low cost

High strength steel Q345B, GB/T 1591-2008 Q345B steel size and stock (mm): 7*2200*6500, 15*1050*8000, 5.5*3000*3600, 15*2200*3650, 32*1800*0000, 7*1600*6000, 28.5*3240*5700, 43.5*1630*3900, 23*2980*3500, 46*750*11300, 6*1460*6000, 10*2500*10000, 40*1770*3350, 26*1830*3500, 26*1800*2800, 11*2890*2880, 26*1300*11000, 43.5*1600*3900, 14*2000*3100, 11*2800*3250, 36*1100*8650, 23.4*2280*2800.

Our company's S355ML material power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the S355ML material utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

In the second step of hot rolling process, different finished mills are used to roll billets or continuous casting billets into finished steel of proper shape and size. This S355ML material production process is called finished product production, which is generally divided into two stages of rough rolling and finish rolling. In the roughing stage, a large amount of reduction (reduction per pass) is adopted to reduce the number of passes and improve the output; after roughing, the finishing stage is entered, and the finishing is carried out with a small amount of reduction to achieve a good surface and accurate S355ML material size.

Mg element can reduce the number, size, distribution and morphology of inclusions in steel such as S355ML material. Micro Mg can improve the size and distribution of carbides in bearing steel. And the carbide particles of bearing steel containing magnesium are fine and uniform. When Mg content is 0.002% - 0.003%, the tensile strength and yield strength of the steel increase by more than 5%, and the plasticity remains basically unchanged.

The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.