EN10025-4 S460ML steel plate with coated surface

ASME SA514 gr.P quenched and tempered alloy steel element composition%C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.45-0.70, P max.: 0.035, S max.: 0.035, Ni: 1.20-1.50, Cr: 0.85-1.20, Mo: 0.45-0.6.0, B: 0.001-0.005The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with EN10025-4 S460ML steel plate ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.

Strengthen system construction. The system itself has a certain binding force, which specifies the rights and obligations of employees. It is a passive management means for employees. Its purpose is to promote each employee to develop good professional habits, form good behavior norms, and promote the improvement of enterprise management level.

Heat treatment is a very important process to improve the performance of EN10025-4 S460ML steel plate etc. metal materials. The process of heating, heat preservation and cooling the steel in solid state to obtain the required structure and properties.