EN10025-4 S420ML steel plate standard specification

Tempering the important EN10025-4 S420ML steel plate welding structure often use high temperature tempering to remove residual weld stress. Classification: high temperature tempering above 400 ℃, medium temperature tempering 250 ~ 400 ℃, low temperature tempering 150 ~ 250 ℃, Quenching +Tempering is improve EN10025-4 S420ML steel plate strength, plasticity and toughness.

Heavy plate EN10025-4 S420ML steel plate spot in Shanghai warehouse65*2250*4600, 110*2600*10600, 100*2600*10300, 130*2600*9350, 100*2600*11830, 140*2600*8550, 70*3020*8100, 58*2600*3300, 120*2600*9800, 100*2600*11700, 120*2600*9800, 68*2065*4500, 130*2500*9000, 180*2600*6800, 180*2600*6750, 92*3020*9600, 150*2500*7500, 100*2600*11800, 180*2600*6780, 200*2600*6130, 200*2600*5980, 200*2600*6000, 200*2600*6150.

EN10025-4 S420ML steel plate, Q345 and Q345B are steel numbers. The differences are as follows:1. Q345 is general and does not indicate the quality level; Q345B is clear and the quality level is B.2. Q345 does not require to inspect the impact performance; Q345B requires that the impact performance at room temperature is qualified (impact at 20 ℃).3. Q345 does not indicate carbon content of steel; Q345B carbon content is 0.20%.Q345 refers to carbon structural steel with yield point (σ s) of 345MPa. The following letters indicate the quality level, including A, B, C, D and E.

For the EN10025-4 S420ML steel plate construction industry, the largest consumer sector of the steel industry and the least affected industry in the EU this year, it is estimated that EN10025-4 S420ML steel plate steel consumption will account for 35% of the EU steel consumption market this year. Uestf forecasts that the output of the construction industry will decline by 5.3% in 2020 and rise by 4% in 2021.