EN S460M steel plates stock online in Netherlands

Galvanized ASTM A36 steel angle Hot-dip galvanized steel angle is ideal for outdoor applications or corrosive environments where black EN S460M steel plates steel angles could be badly corroded in short time. The amount of galvanization is made according your requirements. Product description: Item: A36 Angle Steel. EN S460M steel plates Standard: ASTM A36. Technology: Hot Rolled. Type: Equal & Unequal. Surface: black or galvanized. Equal angle: Size: 20 × 20 mm to 200 × 200 mm. Thickness: 3 to 20 mm. Length: 6 m, 9 m, 12 m or per your request. Unequal angle: Size: 30 × 20 to 250 × 90. Thickness:3 to 10 mm. Length: 6 m, 9 m, 12 m or per your request.

How to prevent EN S460M steel plates, steel plate cutting cracks? 1. Preheat the steel plate before cutting, and the preheating temperature depends on the quality grade and thickness of the steel plate. However, it needs to be heated evenly. 2. The cutting speed is reduced appropriately, but its reliability is not as good as preheating. It is suggested to preheat the cutting belt with flame gun cavitation several times before cutting, and the preheating temperature should reach about 180℃.

EN S460M steel plates 1000 tons in warehouse5.5*3000*5000, 7*2920*8780, 7*1850*6000, 7*2920*13000, 5*2570*8000, 6*2750*9600, 5.5*2450*6500, 6*1850*7510, 6*1750*8500, 7*2560*8600, 8*1620*7870, 8*1500*4850, 8*3040*4000, 7*2920*8780, 10*1500*6850, 5*2570*8150, 6*2310*8500, 8*1700*6300, 5*2490*8200, 8*2100*7800, 10*3000*4750, 10*1750*6000, 5*2490*9000, 8*2090*6640.

After the steel plate is produced from the original factory, it will pass through a series of transportation and storage links and then be delivered to the processing workshop. During this period of time, the steel plate surface will contact with the air continuously, which will inevitably produce a layer of oxide skin. The oxide skin is a difficulty in the treatment process. It has high melting point, is not easy to burn and dissolve, increases preheating time, reduces cutting speed. Therefore, the surface of the EN S460M steel plates plate should be derusted before cutting.