EN 10025 S420M steel plates carbon steel elongation

27SiMn steel plate has high strength and wear resistance, high hardenability, good machinability, moderate cold deformation plasticity and weldability. In addition, the toughness of 27SiMn steel does not decrease much during heat treatment, but it has quite high strength and wear resistance, especially when water quenching still has high toughness; but this steel is highly sensitive to white spots and has temper brittleness during heat treatment. Tendency and sensitivity to overheating.

The company produces seamless steel pipes such as GB, ASTM, etc. all year round, including low and medium pressure boiler steel pipes, high pressure boiler steel pipes, EN 10025 S420M steel plates seamless steel pipes for ships and petroleum cracking EN 10025 S420M steel plates steel pipes, Seamless steel pipe, oil sleeve steel pipe, pipeline steel pipe, hollow sucker rod, common fluid steel pipe, structural pipe, kauden steel pipe, seawater corrosion-resistant titanium pipe and imported alloy steel pipe are used for high-pressure fertilizer equipment. The products are widely used in petroleum, chemical, electric, boiler, ship, machinery and other industries, and have been sold all over the country. Many EN 10025 S420M steel plates products have been exported to the Middle East, India, Southeast Asia and Europe and America.

Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This EN 10025 S420M steel plates rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.

"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, EN 10025 S420M steel plates tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."

The after-sales service personnel understand the user's ideas and needs in detail, and stand on the other side's position and interests. Actively communicate with users and help them solve practical problems. This not only solves the service problem, but also improves the customer's trust in the company.