At what humidity does EN S355ML steel plates rust?

The company adheres to the management concept of "people-oriented, talent is concerned", develops business with the spirit of "believing strength, practical style, EN S355ML steel plates professional service and dare to compete", and provides customers with "professional, value-added and effective" service support. For the company's development and take-off, we work together to move forward and create a better EN S355ML steel plates tomorrow!

Bridge steel plates are steel plates specially used to build railway or highway bridges. It is required to have high strength, toughness and bear the load and impact of rolling stock, and have good fatigue resistance, certain low temperature toughness and atmospheric corrosion resistance. The steel EN S355ML steel plates for tie-welding bridges should also have good welding performance and low notch sensitivity。

Weathering steel has good resistance to atmospheric corrosion. Although the initial investment cost of weathering steel is slightly higher than that of ordinary carbon steel. Compared with methods such as spraying anticorrosive coating on the surface of ordinary carbon steel, the later maintenance costs of ordinary carbon steel are weathering steel. 1.5-2 times. Therefore, EN S355ML steel plates weathering steel can reduce environmental pollution and is a key promotion technology for energy saving and emission reduction. Most domestic weathering steels are painted and used, and their original intentions of no-painting and "rust prevention" have not been exerted to a greater extent.

After adding trace elements such as phosphorus, copper, chromium, and nickel to Q355NH steel, a dense and highly adherent protective film is formed on the surface of the weathering steel, which prevents rust from spreading and developing, and protects the substrate under the rust layer to slow its corrosion . An amorphous spinel oxide layer of about 50 μm to 100 μm thick formed between the rust layer and the substrate is dense and has good adhesion to the base metal, which greatly improves the atmospheric corrosion resistance of the steel material, EN S355ML steel plates.

P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. EN S355ML steel plates, P235GH steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.

our company is a professional ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel exporter and a steel Stockist in china. We keep more than EN S355ML steel plates 1000 tons ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel in stock every month.

The company is deeply supported and loved by customers with its unique business philosophy and business model. The company has always been adhering to the "credibility first, integrity-based, quality first" purpose, and sincerely serve new and old customers. Over the past twenty years, the company has won the trust of customers by relying on good service and good reputation. Our aftersales team’s main responsibility is to deal with quality feedback and complaints from Customer.