Alloy steel EN10025-4 S460ML steel supplier 10mm thick size

At the same time of doing well in EN10025-4 S460ML steel supplier production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the EN10025-4 S460ML steel supplier technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

SM490B is a structural steel produced according to Japanese standard JIS G3106, with a strength σb of 490MPa. This standard applies to bridges, ships, vehicles, petroleum storage tanks, manufacturing plants, general construction and various engineering machinery, such as drilling rigs, electric shovels, electric wheel dump trucks, mining vehicles, and excavators used in mines and various engineering constructions.

The five advantages of EN10025-4 S460ML steel supplier wear-resistant steel plate can reduce its own weight. The steel plate is designed according to the addition of several required alloy elements. Through the special heat treatment method of steel plate, the strength level of EN10025-4 S460ML steel supplier steel plate is improved to make it have high hardness (wear resistance) corresponding to various specifications. The result is a significant reduction in the weight of the structure.

Under the action of the roller and the plug, a cavity is formed in the blank, which is called the blank. Then send it to the automatic tube rolling machine to continue rolling. Finally, the wall thickness of the whole machine is equalized and the diameter is calibrated by the sizing machine to meet the specification requirements. It is an advanced method to produce EN10025-4 S460ML steel supplier, hot-rolled seamless steel tube by continuous rolling mill.

The difference of chemical composition between EN10025-4 S460ML steel supplier, Q420D steel and Q460D steel: Chemical composition of Q420D steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20, Al ≥ 0.015. Chemical composition of Q460D steel: C ≤ 0.20, Si ≤ 0.60, Mn ≤ 1.80, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.55, N ≤ 0.015, Mo ≤ 0.20, B ≤ 0.004, Al ≥ 0.015. The difference of mechanical properties between EN10025-4 S460ML steel supplier, Q420D steel and Q460D steel: The mechanical properties of Q420D steel: yield strength ≥ 420 MPa, tensile strength 500-680 MPa. The mechanical properties of Q460D steel: yield strength ≥ 460 MPa, tensile strength 500-720 MPa.

We are committed to providing customers with high-quality services, high-precision products and efficient solutions. If you have any demand for EN10025-4 S460ML steel supplier steel plate, steel pipe and other products, please contact us directly. We are willing to provide you with relevant product knowledge and specific specifications for free. Welcome to purchase.

Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.